Renovate The Color Of An Antique Bathroom Vanity
Antique bathroom vanity – To make an antique bathroom vanity, please prepare the strip the antique of the original finish. Sand the finish line down with a high-sandpaper grain, between 100 and 150 gravel. Wipe the surface after grinding with a damp cloth. Apply a chemical stripper to the finish line. Use a “wash away” chemical stripper. Use rubber gloves. Allow the chemical stripper to sit on the finish line. Start scratching the old finish when it is soft and rubbery and can be peeled back with a spatula.
Clean chemical strips out of the tree with water. Sand with 120-gravel sandpaper until the surface is smooth to touch, then sand with 220-gravel sandpaper. Wipe off with a damp cloth. Apply a thin layer of oil-based stain. Oil based is the best solution for wooden antique bathroom vanity that will be in a bathroom. Apply another thicker layer after the first layer has been absorbed in the wood, but before it is dried. Use a cloth to apply the stain and move the stain over the wood with grain instead of against it.
Remove the excess stain with a clean cloth and allow the wood to dry completely. Apply a very thin coating to the dry surface. Apply evenly and let it dry. Then sand the surface with 400 sandpaper grain. Wipe the surface with a dry cloth. This will seal the stain. Apply multi-layer finishing, grinding between layers. Use a medium to high-gloss polyurethane as a finish. Choose a mirror with an elegant antique feel to compliment your renovated antique bathroom vanity. Hang the mirror on the wall just behind vanity or attach it to vanity itself. Avoid excess water to sit directly on the tree.antique bathroom vanity, antique bathroom ideas